Inconel 718 Pipe Fittings

Inconel 718 45 degree Elbow, Inconel 10d Pipe Bend, Inconel UNS N07718 Seamless Pipe Fittings, Inconel 718 Pipe Fittings, ASME SB366 Inconel 718 Long Stub Manufacturer in Mumbai,India.

ANSI B16.9 Inconel 718 Welded Buttweld Fittings, Inconel 3d Pipe Bend, Inconel 718 Pipe Elbow, Inconel WERKSTOFF NR.2.4668 Cross, ASTM B366 Alloy 718 90 degree Elbow Suppliers in Mumbai,India.

We are Manufacturer, Supplier & Exporter of Inconel 718 Butt Weld Pipe Fittings that are actually manufactured from High Quality of Standard Raw Materials and are designed as per with national and international standards. WNR 2.4668 Butt Weld Pipe Fittings is a nickel-based super alloy that is well suited for applications requiring high strength in temperature ranges from cryogenic up to 1400 degrees Fahrenheit. UNS N07718 Pipe Fittings also exhibits excellent tensile and impact strength. These Pipe Fittings are used in a wide range of different industries. These are used in the manufacturing of valves and components of turbine engines. The Pipe Fittings are manufactured in different sizes and shapes as per the demand of the customers.

Our Inconel 718 Tee Pipe Fittings has excellent creep-rupture strength at temperatures to 1300 Degree F (700 Degree C). Welding an age-hardened Inconel 718 Cross Pipe Fittings will result in the formation of a softened heat-affected zone. Our Inconel 718 Reducer Pipe Fittings is often used in gas turbine engine parts, well head completion equipment and blow out preventers (BOP’s). Inconel 718 Elbow Pipe Fittings has excellent weldability when compared to the nickel-base super – alloys hardened by aluminum and titanium. Inconel 718 Tee Pipe Fittings combines corrosion resistance and high strength with outstanding weldability, including resistance to post – weld cracking. Meanwhile, these Inconel 718 Reducer Pipe Fittings are also being offered in different sizes and shapes to our customers.

Specification

Grade	Inconel Alloy 718 / UNS N07718
Standard	ASTM B366, ASME SB366
Dimensions	ASME B16.28, ASME/ANSI B16.9, MSS-SP-43
Inconel 718 Seamless Fittings	1/2" NB - 10" NB
Inconel 718 Welded Fittings	1/2" NB - 48" NB
Form	90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap
Schedule	SCH 5 To SCH XXS
Wall Thickness	from 2 to 40 mm
Type	Seamless / Welded / Fabricated

Grade Specification

Grade	UNS No	Old British		Euronorm		GOST	Japanese JIS
		BS	En	No	AFNOR
Inconel 718	N07718	–	–	2.4668	–	–	–

Chemical Composition

Grade		C	Mn	Si	Fe	S	Cr	Al	Ni
718	min.	–	–	–	bal	–	17.0	0.2	50.0
	max.	0.08	0.35	0.35	bal	0.01	21.0	0.8	55.0

Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
718	8.14 g/cm3	1400 °C (2550 °F)	Psi – 80,000 , MPa – 550	Psi – 32,000 , MPa – 220	30 %

Other Types of Inconel 718 Pipe Fittings