Inconel 825 Pipe Fittings

Inconel 10d Pipe Bend, 825 Incoloy Alloy End Cap, Incoloy 825 Pipe Fittings, Incoloy 825 Alloy Pipe bend, Inconel 5d Bend, 825 Incoloy End Cap, 825 Incoloy Pipe Cap, 825 Incoloy Alloy End Cap Suppliers in Mumbai,India.

Incoloy UNS N08825 Seamless Pipe Fittings, ANSI B16.9 Incoloy 825 Welded Buttweld Fittings, Incoloy WERKSTOFF NR. 2.4858 Cross, ANSI B16.9 Incoloy 825 Welded Buttweld Fittings, ASTM B366 825 Incoloy 90 degree Elbow Manufacturer in Mumbai,India.

We are Manufacturer, Supplier & Exporter of Incoloy 825 Butt Weld Pipe Fittings, which has good mechanical properties from moderately to high temperatures. Incoloy 825 Pipe Fittings is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. This combination gives Incoloy 825 Butt Weld Fittings enhanced corrosion resistance in the harshest environments. Alloy 825 Butt Weld Pipe Fittings is a nickel iron chromium alloy with exceptional resistance to many aggressive corrosion environments. Applications for Incoloy UNS N08825 Butt Weld Pipe Fittings from Victor Steel Corporation include the handling of radioactive wastes, nuclear fuel reprocessing, pickling operations, acid production, oil and gas recovery, pollution control and chemical processing.

Inconel 825 is a Nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. The alloys chemical composition provides exceptional resistance too many corrosive environments. The Nickel content is sufficient for resistance to Chloride-ion stress corrosion cracking. Incoloy 825 Elbow Pipe Fittings is stabilizing annealed at 940 Degree C, where the softest structure is obtained at 980 Degree C. Incoloy 825 Tee Pipe Fittings is used for radioactive waste handling and marine exhaust systems. Incoloy 825 Reducer Pipe Fittings is superior to conventional stainless steels such as 316L. For grinding, Incoloy 825 Cross Pipe Fittings should be wet ground and aluminum oxide wheels or belts are preferred. We engineer UNS N08825 Incoloy 825 Pipe Reducers which have higher resistance to the crevice and pitting corrosion, with the capacity to function smoothly at moderately elevated temperatures.

Specification

Grade	Incoloy Alloy 825 / UNS N08825
Standard	ASTM B366, ASME SB366
Dimensions	ASME B16.28, ASME/ANSI B16.9, MSS-SP-43
Incoloy 825 Seamless Fittings	1/2" NB - 10" NB
Incoloy 825 Welded Fittings	1/2" NB - 48" NB
Form	90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap
Schedule	SCH 5 To SCH XXS
Wall Thickness	from 2 to 40 mm
Type	Seamless / Welded / Fabricated

Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN	OR
Incoloy 825	2.4858	N08825	NCF 825	NA 16	ЭП703	NFE30C20DUM	NiCr21Mo	XH38BT

Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr	Al	Ti
825	0.05 max	1.00 max	0.05 max	0.03 max	1.50 – 3.00	22.00 min	38.00 – 46.00	19.50 – 23.50	0.02 max	0.06 – 1.20

Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
825	8.14 g/cm3	1400 °C (2550 °F)	Psi – 80,000 , MPa – 550	Psi – 32,000 , MPa – 220	30 %

Other Types of Inconel 825 Pipe Fittings