Monel K500 Pipe Fittings

Alloy K500 Short Radius Elbow, Monel 3d Pipe Bend, Monel 10d Pipe Bend, Monel K500 Pipe Fittings, K500 Monel Alloy End Cap, ANSI B16.9 Monel K500 Welded Buttweld Fittings Manufacturer in Mumbai,India.

ASME SB366 Alloy K500 Long Stub, Monel 1.5d Pipe Bend, ASTM B366 K500 Monel Alloy 90 degree Elbow, Alloy Equal Tee, Monel K500 45 degree Elbow, Monel DIN 2.4375 Cross Suppliers in Mumbai,India.

We are Manufacturer, Supplier & Exporter of Monel K500 Pipe Fittings (UNS N05500). These Alloy K500 Butt Weld Pipe Fittings are often used in sea water pump shafts and impellers, as well as being used in the oil well industry for valve trim and other components. UNS N05500 Butt Weld Pipe Fittings is an age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Monel 400 with high strength corrosion fatigue and erosion resistance. Alloy K500 Butt Weld Pipe Fittings may be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack. Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride. Monel K500 Butt weld Pipe Fittings are used in application such engineering, Chemical processing, Hydro-carbon processing, Heat exchangers and more.

Monel K500 Pipe Bend is a solid – solution binary alloy and has exceptionally good dimensional stability. Meanwhile, these Monel K500 Tee Pipe Fittings are also being offered in different sizes and shapes to our customers. Like most other nickel alloys, Monel K500 Stub End Pipe Fittings is typically tough to machine and will work harden. We provide Aluminium and Titanium added UNS N05500 Monel K500 Pipe Tees are known to perform well in sour gas environments, countering H2S and other harmful acids. Likewise, our WNR 2.4375 Monel K500 Pipe Nipples are helpful in joining many aviation and aerospace industry equipment, available in several fabrications and end connections.

Specification

Grade	Monel K500 / UNS N05500
Standard	ASTM B366, ASME SB366
Dimensions	ASME B16.28, ASME/ANSI B16.9, MSS-SP-43
Monel K500 Seamless Fittings	1/2" NB - 10" NB
Monel K500 Welded Fittings	1/2" NB - 48" NB
Form	90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap
Schedule	SCH 5 To SCH XXS
Wall Thickness	from 2 to 40 mm
Type	Seamless / Welded / Fabricated

Grade Specification

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Monel K500	N05500	2.4375	–	–	–	–	–

Chemical Composition

Monel K500	Ni	C	Al	Mn	Si	Fe	Cu	S	Ti	Cr
	63.0 min	0.25 max	2.3 – 3.15	1.5 max	0.5 max	05 – 2	27.0 – 33.0	0.010 max	0.35 – 0.85	–

Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.44 g/cm3	1350 °C (2460 °F)	Psi – 1,15,000 , MPa – 790	Psi – 1,60,000 , MPa – 1100	20 %

Other Types of Monel K500 Pipe Fittings