Alloy 20 Round Bars

Alloy 20 Black Bar, Hot Rolled Alloy 20 Round Bar, Alloy WERKSTOFF NR. 2.4660 Round Bars, Incoloy alloy 20 Square Bars, ASTM B473 Alloy Threaded Bar, Alloy 20 Flat Bar Suppliers in India.

Incoloy alloy 20 Cold Drawn Round Bar, Alloy UNS N08020 Bright Bar, Alloy 20 Polished Bar, ASTM B473 Alloy 20 Hex Bar, Alloy 20 Round Bar, Alloy 20 Square Bar, ASTM B473 Alloy 20 Round Bars Manufacturer in India.

We are Manufacturer, Supplier & Exporter of Alloy 20 Round Bars that are actually manufactured from High Quality of Standard Raw Materials and are designed as per with national and international standards. Alloy 20 Bars has higher resistance to stress-corrosion cracking in boiling 20 percent to 40 percent sulfuric acid. UNS N08020 Round Bars has outstanding general corrosion resistance to sulfuric acid. Additionally alluded as UNS N08020, these round bars and rods can further be redone as far as sizes and thicknesses according to particular prerequisites given by our regarded customers. We offer the same at business sector driving costs.

Alloy 20 (UNS N08020) is an austenitic, nickel-iron-chromium based super alloy with additions of Copper and Molybdenum which provide resistance to hostile environments, pitting, and crevice corrosion. It is also stabilized with Columbium to minimize carbide precipitation during welding. UNS N08020Round Bars contains niobium for stabilization against sensitization resulting in intergranular corrosion. It has first-rate resistance to general corrosion, pitting, and crevice corrosion in chemicals, containing chlorides and sulfuric, phosphoric, nitric acids. Furthermore insinuated as UNS N08020, these round bars and poles can further be revamped the extent that sizes and thicknesses as per specific essentials are given by our respected clients. We offer the same at business division driving expenses.

Specification

Grade	Alloy 20 | UNS N08020
Specification	EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard	ASTM B473, ASME SB473
Size	5 mm to 500 mm
Diameter	0.1 mm to 100 mm Diameter
Thickness	100 mm to 3000 mm Length & Above
Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish	Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form	Round Bars, Square Bars, Flat Bars, Threaded Bars, Hollow Bars, Hexagonal Bars, Triangular Bars

Grade Specification

STANDARD	WERKSTOFF NR.	UNS	AFNOR	EN
Alloy 20	2.4660	N08020	Z2NCUD31-20AZ	NiCr20CuMo

Chemical Composition

Grade	C	Mn	Si	Cu	S	Fe	Mo	Ni	Cr
Alloy 20	0.02 max	1.0-2.0	0.7 max	3.0-4.0	0.005 max	bal	2.0-3.0	32 – 38	19 – 21

Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.1 g/cm3	1443 °C (2430 °F)	Psi – 80000 , MPa – 551	Psi – 35000 , MPa – 241	30 %

Other Types of Alloy 20 Round Bars