Flanges
   
   
  MANUFACTURER & EXPORTER OF STAINLESS STEEL SEAMLESS PIPES & TUBES AND HIGH NICKEL ALLOYS PIPES , HEAT EXCHANGER TUBES
   
  304/L PIPES , 316/L PIPES , 321 PIPES , 317L PIPES , 347 PIPES , 904L TUBES ,
INCONEL 625 TUBES , INCONEL 825 TUBES , MONEL 400 TUBES , A 106 GR B , A333 GR 6
PIPES , API-5LGR.B/X42/X46/X52/X60/X65/X75 , ASTM A335 GR. P-1/P-2/P-5/P-9/P-11/
P-12/P-22/P-91/P-92/P-122

Manufacturer, Supplier & Exporter of Stainless Steel Flanges - ASTM A182 F304 / 304L / 304H / 316/ 316L / 321 / 310 / 347 etc
    Flanges  
 
Steel Pipes & Tubes
Stainless Steel Pipes & Tubes
ERW Pipes & Tubes
Carbon Steel Pipes & Tubes
Alloy Steel Pipes & Tubes
Mild Steel Pipes & Tubes
Capillary Pipes
Steel Coils and Sheet
Steel Plates
Forged Pipe Fittings
Butt Weld Fittings
Olets & Outlets Fittings
Flanges
Steel Round Bars
Fasteners
Nickel
Cupro Nickel Tubes
Hastelloy Products
Inconel Products
Monel Products
Duplex Steel Products
IBR Products
Copper
Titanium
Brass
Alloy 20 Products
Alluminium Products
Round Bar
   
   

   
   
   
   
 
  : : Flanges : :  
Manufacturer, Supplier & Exporter of Steel Flanges - Slip On - SORF Flanges,ss Flanges, Weld Neck - WNRF Flanges, Socket Weld - SWRF Flanges, Blind - BLRF Flanges, Lapped Joint Flanges, Screwed Flanges, Long Weld Neck Flanges, Reducing Flanges, Spectacle Flanges, Ring Joint Flanges, Plate Flanges
 


Flanges
 

VICTOR STEEL Corporation is a fully integrated, forging and machining manufacturer of domestic and import stainless and alloy flanges with operations located in INDIA. VICTOR STEEL has become the most diversified stainless and alloy flange manufacturer in the world by offering a complete line of both small and large diameter sizes, combined with a full range of pressure classes in many various grades of material.

It is our dedication to assure a superior product and service to all of our customers. We hope you enjoy your experience with VICTOR STEEL and look forward to your continued business.

WE SUPPLY FLANGES IN VARIOUS TYPES LIKE WELD NECK , SLIP ON , BLIND , LAP-JOINT ,
THREADED , SOCKET WELD , ORIFICE


Types of Flanges Available: Weldnecks, Slip-Ons, Threaded, Blind, Socketweld,
Lap-Joint, Orifice, Reducing Flange, super duplex flanges and Specials.

Types of Flange Faces: Raised Face, Flat-Face, Ring Joint, Tongue & Groove, and Male
& Female.

Slip On Flanges:
Slip on raised face flange (SORF) and Slip on Flat Face Flange (SOFF) are used in quick assembly to save the cost. Slip on flanges are used in less strict requirements in terms of length of pipe section. We provide wide range of Slip on flanges that are designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.
Size: ½” to 48” Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#



Material of Construction Standard Grades
Stainless Steel Slip on Flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel Slip on Flanges ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel Slip on Flanges ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloy Slip on Flanges ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloy Slip on Flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel Slip on Flanges ASTM A350 LF2 , LF3
Duplex Steel Slip on Flanges ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61




 
Weld Neck Flanges:
Weld Neck flanges are in high demand in export as well as domestic market and are manufactured by our unit with international quality and standards. We provide wide range of Weld Neck flanges that are designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.

Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Standard Grades
Stainless Steel  Weld Neck flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel Weld Neck flanges ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloys Weld Neck flanges ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloy Weld Neck flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel ASTM A350 LF2 , LF3
Duplex Steel ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Lap joint Flanges:

Lap Joint flanges are used primarily when quick assembly & dissembly of pipe line section is required under limited working pressure. We provide wide range of Lap Joint flanges that are designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.

Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Standard Grades
Stainless Steel Lap Joint flanges  ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel Lap Joint flanges  ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel Lap Joint flanges  ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloy Lap Joint flanges  ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys Lap Joint flanges  ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel Lap Joint flanges  ASTM A350 LF2 , LF3
Duplex Steel Lap Joint flanges  ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Blind Flanges (BLRF):

Blind Flanges are used in quick assembly to save the cost. These are blank flanges and have no bore. We provide wide range of Blind flanges that are designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.

Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Standard Grades
Stainless Steel Blind Flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel Blind Flanges ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel Blind Flanges ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloy Blind Flanges ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys Blind Flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel Blind Flanges ASTM A350 LF2 , LF3
Duplex Steel Blind Flanges ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Threaded Flanges:
Threaded flanges are used in special requirements to work under high temperature and pressure ensuring no welding point in the assembly. We provide wide range of Threaded flanges that are designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.
Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Standard Grades
Stainless Steel Threaded flanges  ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel Threaded flanges  ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel Threaded flanges  ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloy Threaded flanges  ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloy Threaded flanges  ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel Threaded flanges  ASTM A350 LF2 , LF3
Duplex Steel Threaded flanges  ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Long weld Neck flange:

We offer long neck weld flanges in various types to meet the demands of several engineering and process industries. These flanges are in accordance with the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.

Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Standard Grades
Stainless Steel ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloys ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel ASTM A350 LF2 , LF3
Duplex Steel ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Orifice Flange:

We provide wide range of orifice flanges that is designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.
Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Standard Grades
Stainless Steel orifice flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel orifice flanges ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel orifice flanges ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloys orifice flanges ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys orifice flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel orifice flanges ASTM A350 LF2 , LF3
Duplex Steel orifice flanges ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Plate Flange:

We provide wide range of quality approved range of plate flanges that is used for connection between pipes and tubes in several industry verticals. Offered to our clients in several types like spectacle blind, slip on (SORF), blind (BLRF), lap joint, reducing, ring joint and large dia ring. These flanges are hot dip galvanized and epoxy coating for compliance with international standards like ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE. Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

 

Grades:
Stainless steel plate flange

  • 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H and 904L
Copper alloy plate flange
  • C 70600 (CU -NI- 90/10) - Cupro Nickel Plate Flanges
  • C 71500 (CU -NI- 70/30) - Cupro Nickel Plate Flanges
  • UNS NO. C 92200, UNS NO. C 83600, UNS NO. UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200
Duplex steel plate flange
  • S 31803
  • S 32205
Alloy steel plate flange
  • ASTM SA 387 Grade 1/5/9/11/22/91
Carbon steel plate flange
  • ASTM A 36, IS 2062
Low temperature carbon steel plate flange
    • A 516 GR.70
 
Reducing Flange:

We are offering our clients with a precision engineered range of reducing flanges. Available in various types, these reducing flanges are in accordance with the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE. To ensure longer serviceability of these flanges, we provide them with hot dip galvanization and epoxy coating. For maximum satisfaction of our clients.

Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#


Material of Construction Standard

Grades
Stainless Steel reducing flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel reducing flanges ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel reducing flanges ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloys reducing flanges ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys reducing flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel reducing flanges ASTM A350 LF2 , LF3
Duplex Steel reducing flanges ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
Socket weld flanges:

Our customers can avail from us, an extensive range of SWRF - socket weld raised face flanges that is available in several types and material grades. Our flanges are in line with the standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE.
Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Standard

Grades
Stainless Steel Socket weld flanges ASTM A182 , A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel Socket weld flanges ASTM A105 Gr. F42,46,52,56,60,65,70
Alloy Steel Socket weld flanges ASTM A182 F1,F5,F9,F11,F22,F91
Nickel Alloys Socket weld flanges ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys Socket weld flanges ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel Socket weld flanges ASTM A350 LF2 , LF3
Duplex Steel Socket weld flanges ASTM A182, A240 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
DIN Flanges

Our quality inspected Flanges comply with DIN (Deutsches Institute for Normung) standards for manufacturing of flanges. These din flanges, din pipe flanges, stainless steel din flanges are made up of qualitative metals that provide extra-strength to the flanges. These flanges are available in accurate standard sizes; our range of DIN Flanges can be customized as per the requirements of the clients.

Size: ½” to 48”
Class: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

Material of Construction Grades
Stainless Steel F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L
Carbon Steel Gr. F42,46,52,56,60,65,70
Alloy Steel F1,F5,F9,F11,F22,F91
Nickel Alloys Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020),
Copper Alloys UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200,
Low Temperature Carbon Steel LF2 , LF3
Duplex Steel UNS F 44, F 45, F51, F 53, F 55, F 60, F 61
 
 
       © All Rights reserved by Victor Steel Corporation 2010.                                                   Website Design Company : Ad:Vedha Commmunication